Description
Starlink Mk3 / generation 3 pole adapter
Available to fit 1.5″ or 2.0″ poles.
The 2.0″ version will also fit a scaffold pole if a few turns of tape (preferably self-amalgamating) are wrapped around the end of the mast before clamping on the adapter.
Also supplied (at a discount) in our Starlink installation kits (as an option).
This is a heavy duty product (the thickness around the collar is 8mm) for installing a Starlink Mk3 on a pole.
This product clamps around the pole and it is specifically made for 1.5″ or 2.0″ poles, there are no flimsy screws to enable the adapter to fit different size poles (which is a poor idea…). The depth of the clamping collar is approx 63mm / 2.5″.
Manufactured in UV stabilised PETG, which has superior UV resistance to ABS etc (though the plate is on the underside of the Starlink and therefore shaded to some extent anyway !).
20 degree angle optimised for the UK.
The fasteners are stainless steel and the nuts are Nyloc.
5 year guarantee : if this adapter fails within 5 years we will replace it for free (excluding the cost of the carriage).
We believe this is the best of the available pole adapters, see what to check for in a Starlink Mk3 pole adapter.
With reference to the effect of UV on plastic, our pole mount is UV stabilised, but, as the image above clearly shows, it is difficult to get a good picture of the pole mount in use because, it’s almost always in the shade !
The Starlink Mk3 pole adapter being driven over by a van….
Size of Starlink pole adapter package : approx 25cm x 15cm x 9cm at 400g.
Carriage charges.
Non UK orders ALWAYS incur a carriage surcharge.
