Description
Heavy Duty clamp kits.
Note : these clamps would normally be used in pairs.
The minimum diameter pole is 1″ on the 2.0″ and 2.5″ clamp kit, and 1.25″ on the 3.0″, 3.5″ and 4.0″ clamp kits.
The maximum diameter pole is dictated by the relevant size of the clamp kit.
Will only clamp parallel, not perpendicular.
The 2″ clamp is also available in all stainless steel
One kit comprises :
2 x 0.5m lengths of stainless studding
Four galvanised sledges (finish may vary)
One stainless M10 nut and washer pack (8 x nuts & 8 x washers)
The dimensions of the saddles :
These clamps are available with plain or Nyloc (4 of 8) nuts.
These clamp kits can be used in conjunction with our 20×20 box section alloy, e.g. :
Also see 2×2 clamps, and 3×3 clamps.
